There are currently no product reviews.
NOTE: Reviews require prior approval before they will be displayed
- English
- My Account
sales@optics-focus.com +86 10 61507521 Business Hours: Mon.-Fri. 9a.m.-6p.m.(UTC+8)
Features:
Better performance for vertical use or upside-down use
Clearance elimination design for long life
Precision ground and hardened worm gear with self-compensating preload
Proprietary ball bearings provide smooth motion with low wobble
Laser-engraved scale ring for easy reading and positioning
NEMA 17 stepper motor driven and DB9 interface
Hand wheel for manual drive
Description:
The MOR-100-30-A rotation stage is a compact and precise device that can rotate continuously by 360°. It features precision ground worm gear which delivers consistent torque to the rotating carriage, while the proprietary ball bearing design ensures smooth rotation with minimal wobbling.
This motorized rotation stage is equipped with a hardware origin and a central aperture of 30mm. A hall effect sensor is built into the device to prevent the top plate from moving in the negative direction and passing over the zero position.
The stage's scale ring can be easily turned manually and, after the device has been returned to the zero position by the controller or software, the scale ring can be adjusted to align with the 0 scales.
To control the device, it can be connected to our motion controller via the DB9 interface and controlled using our computer software through either the USB or RS232 interface on the controller.
Specifications:
|
Model |
MOR-100-30-A |
|
|
Table Diameter |
100mm |
|
|
Angular Range |
360° |
|
|
Mechanical Drive System |
Worm Gear |
|
|
Transmission Ratio |
180:1 |
|
|
Resolution (1/8 Micro Step) |
0.00125° |
|
|
Unidirectional Repeatability |
0.004° |
|
|
Wobble |
±20μ |
|
|
Eccentricity |
±20μ |
|
|
Backlash |
10μ |
|
|
Motor Type |
NEMA17 Stepper Motor (1.8°) |
|
|
Motor Connector |
DB9(M) |
|
|
Maximum Static Torque |
0.4Nm |
|
|
Rated Current |
1.7A |
|
|
Maximum Speed (1/2 Micro Step) |
25°/s |
|
|
Minimum Speed (1/8 Micro Step) |
150”/s |
|
|
Aperture Diameter |
ø30+0.025mm |
|
|
Home Switch |
Built-in (Hall Effect Sensor) |
|
|
Load Capacity |
Horizontal |
50kg |
|
Vertical/Upside Down |
20kg |
|
|
Weight |
2.1kg |
|
|
Material |
Aluminum Alloy |
|
|
Surface Treatment |
Black Anodized |
|
|
Thread Type |
M4, M6 |
|
|
Operating Temperature Range |
-20℃ to 40℃ |
|
|
Recommended Controller |
||
Drawing:
Motion Controller:
01 series motion controller can be used to control motorized stage with NEMA17 stepper motor. We have 220V and 110V power supply options for each motion controller. The USB line can be used to connect the motion controller to laptop. Please click the following links to get more information.
MOC-01 Series Motion Controller (for NEMA17 Stepper Motor, 220V)
MOC-01 Series Motion Controller (for NEMA17 Stepper Motor, 110V)
Pin Layout:
Pin Layout of Motorized Rotation Stage with Hall-Effect Sensor (PDF)
Datasheet of Stepper Motor:
DataSheet of NEMA17-1.8 Stepper Motor.pdf (PDF)
Datasheet for Hall Effect Sensor:
Datasheet for Hall Effect Sensor (PDF)
Auto CAD (.PDF) and SolidWorks Model(.STEP):
Payment Methods
Credit Card
We accept credit card payment by PayPal. Please select PayPal payment when you place the order. At the PayPal payment page, please fill in your credit card information. We will receive your payment by PayPal. Both Private credit card and Company credit card can be used by PayPal payment.
When you use this payment method, there will be an additional 3% PayPal service fee charged by us.
PayPal Account
If you have a PayPal account, you may pay with your PayPal account without filling your billing address.
When you use this payment method, there will be an additional 3% PayPal service fee charged by us.
Wire Transfer
We can also accept payment by wire transfer. Please contact us to get an official proforma invoice with our bank details.
When you use this payment method, you should pay all the banking fees for both sides.
Shipping & Delivery
Generally, we will ship your order within 5 business days after the order date. But the shipping date may vary by product and quantity. If you need an exact shipping date, please contact us before ordering online.
The default shipping method is FedEx. We may also use DHL, TNT or UPS according to the real situation. The transmit time will vary by destination. It’s generally about 4-7 days.
You can get the shipping cost on the cart page after the items are added in.
